Technology

Water is life, essential for daily sustenance and healthy living. With plummeting groundwater levels, contamination of water sources and increasing consumption, challenges in the water sector have increased manifold. Safe, sustainable and affordable water in the face of growing water needs is a severe challenge. With fresh water supplies already hard pressed to meet growing demand, technology plays an important role in managing and using the limited available water in a cost effective and critical manner.

Water contamination occurs both due to human activities and natural processes. Depending upon the purpose for which the water is needed--municipal, industrial or agriculture--treatment is carried out. The technology used will depend upon the current water quality, future standards required and economics of the treatment method. Water treatment removes contaminants that may be biological, physical or chemical in nature. 

Various water treatment technologies are present that purify polluted water by removing undesirable chemicals or biological contaminants and making it fit for human consumption. Use based classification of surface waters in India has been laid down by the Central Pollution Control Board (CPCB). The details of the permissible and desirable limits of various parameters in drinking water as per Bureau of Indian Standards (BIS) standard specifications for potable water are also detailed in the IS 10500:1991

Water treatment plants use technologies to produce water that is safe both chemically and biologically, and that is appealing in terms of colour, odour and taste. The control point for water quality determination must be the consumer's tap and not the treatment facility, which means that the water quality must not be impaired during transmission, storage and distribution to the user. The treatment methods at the plant include aeration, coagulation and flocculation, sedimentation, filtration and disinfection.  Some of the prevalent water purification & treatment technologies are listed below.

  • Capacitive Deionization (CDI) is a technology where ions are removed from water by passing it through a spacer channel with porous electrodes on each side
  • Ozonation is a chemical water treatment technique based on the infusion of ozone into water
  • Ultraviolet technology uses Ultraviolet light, just like sunlight, to kill micro-organisms present in the water
  • Reverse Osmosis (RO) is a technology that removes a large majority of contaminants by pushing the water under pressure through a semi-permeable membrane
  • TERAFIL is a burnt red clay porous media used for filtration & treatment of raw water into clean drinking water, developed Council of Scientific & Industrial Research (CSIR), Bhubaneshwar 
  • OS- Community scale Arsenic Filter is an organic arsenic filter, developed by IIT Kharagpur
  • Filtration methods that may include rapid/ slow sand filters remove dirt, rust, silt, dust and other particulate matter from water
  • Solar water purification systems 

Water treatment technologies for safe, potable water in rural areas that includes Capacitive Deionization Technology (CDI) using carbon aerogel, solar operated groundwater treatment plants and electro chlorination are described in a booklet ‘Compendium of innovative technologies on rural drinking water & sanitation’ by the Ministry of Drinking Water and Sanitation. 

Domestic drinking water filtration methods vary depending upon the method of purification used, the degree of ‘purity’ required, and the type of contaminants in the water. No one technology will fulfil all criteria--there is no ‘silver bullet’ solution. Some of the more popular methods for Household Water Treatment & Safe Storage (HWTS) options includes boiling, SODIS (Solar disinfection), Chlorine Tablets, Liquid Chlorine (online, Biosand filters, Flocculent treatment, Ceramic candle, Filter combinations, Pureit filters, Ultra Violet (UV) filters, Reverse Osmosis (RO) and Ion Exchange (IEX).

For more on water purification systems, click here.

Domestic Greywater Recycling Water filtration technologies

Any used water, other than sewage from toilet basins that exit a house or apartment complex, is referred to as sullage or greywater. This is mostly made up of water used in bathrooms and kitchens, constituting the bulk--nearly 60%-70%--of the total volume of water used in a day. 

Before underground sewerage was introduced in most cities, water followed a cyclical route. Water was drawn from dug wells within the premises. Refuse water from the bathrooms and kitchen was let out into the garden while water from the closets reached septic tanks. The soil treated the greywater and sent it back into the ground, thereby closing the household water consumption-reuse loop.

Contrary to popular belief, greywater is largely free from pathogens. As it is mostly made up of easily degradable organic waste and chemicals from cleaning products, it can be purified and reused in-situ with minimal effort. In many homes and apartment complexes, sending this perfectly reusable resource out of the plot along with sewage common-sight. Greywater can be brought back into the water cycle by employing simple biological and mechanical filtration techniques.

There are two basic requirements apart from the necessary plumbing arrangements for treating domestic wastewater:

  1. Open soil space
  2. Water loving plants

Water from bathrooms and kitchens can be diverted through a dedicated pipeline into the plant bed set aside for the treatment process. Here, the nutrients present in the waste water are absorbed by water loving plants such as Canna or Cyperus while the soil bacteria polish off the organic waste from the water. 

  • Constructed wetlands – These wetlands are created to replicate the process of bio-filtration that occurs in a natural setting. Here, the water is purified using two media, the planted surface and the gravel bed underneath. 
  • Reed bed treatment plants – A smaller version of the constructed wetlands, reed beds are perfect for individual houses and smaller complexes.
  • Mechanical filtration – Mechanical systems such as sand filters and pebble flow systems can be used to help filter out waste from the water by separating the discernable solids from the liquid component. 
  • Lava filters – These pebble filters are a combination of both biological and mechanical systems where the stones act as support structures for microorganisms that help break down the waste. 

For more on the basics of rainwater harvesting and greywater recycling, refer Self reliance in water: A book by Indukanth Ragade.  

Sewage treatment--Municipal and Industrial

Waste water flowing out of urinals and toilet closets are referred to as ‘blackwater’ or sewage. Blackwater cannot be treated in the same way as greywater as the former contains a heavy pathogen load from the fecal matter suspended in it. Sewage from towns and cities flowing directly into water bodies is one of the major reasons for water pollution.

Municipal wastewater treatment plant, Yelahanka, Bangalore

While City Corporations are in charge of laying underground sewerage pipes to collect, channel and treat sewage, localities outside city limits have a greater responsibility of managing their own waste. Apartment complexes and townships mostly rely on small scale sewage treatment plants (STP) to treat their waste.

Wastewater can be treated either in the presence or absence of oxygen. While aerobic digestion involves the breakdown of waste by microorganisms in the presence of oxygen, anaerobic systems work in its absence. Various types of processes are used to treat both domestic and industrial waste water such as:

  • Activated Sludge Process where biological agents such as bacteria are used in the presence of air to oxidise the nutrients present in the sewage 
  • Sequencing Batch Reactors help equalize, aerate and sediment waste water in timed batches by mixing it with activated sludge and oxygen to reduce the organic load 
  • Membrane Bio Reactors provide a higher degree of organic and solid removal by combining the principles of both mechanical filtration and biological digestion to treat municipal waste 
  • Moving Bed Bioreactors are mainly used for aerating and treating high-strength wastewater where several floating polyethylene bio-films move in suspension provide surface area for the nutrient-digesting bacteria to grow 
  • Trickling filters are low-cost, aerobic systems made up of a fixed bed of gravel, rocks and moss over through sewage is passed to remove the nutrient material in the suspension 
  • Facultative aerated lagoons are shallow ponds where the sewage is allowed to with the atmospheric oxygen in the upper layers while the sludge settles down at the bottom 
  • Waste stabilisation ponds, categorized into three broad types – anaerobic, facultative and aeobic depending on the oxygen use intensity – help in reducing nutrient content and polishing waste water to re-use quality 
  • Up-flow anaerobic sludge blanket digestion treats wastewater in the absence of oxygen where the feed enters the tank through the bottom and flows upward as the bacteria present in the sludge digest organic the matter 

The CPCB publication on the status of sewage treatment in India throws light on the performance of sewage treatment plants across the country and the technologies currently being used in them. The status of waste water generation and treatment across the country is also available on the ENVIS Centre on hygiene, sanitation, sewage treatment systems and technology. 

Featured Articles
October 14, 2022 Arthan organizes a fireside chat to highlight the need for more data talent for social impact
There is a need to integrate data science into the existing education system (Image: Mohamed Mahmoud Hassan, Public Domain Pictures)
May 25, 2022 Enabling a culture of data sharing between programs and reuse of data
Participatory programs such as JJM require a large amount of village-level information on water (Image: Arpit Deomurar, FES)
April 13, 2022 Over 30% of Indian districts are prone to extreme forest fires, as per a CEEW study
More than 275 million people in India are exposed to extreme forest fire events. (Image: Naveen N Kadalaveni, Wikimedia Commons)
April 3, 2022 IoT-Cloud based water monitoring enables to build up ESG compliances, reduces water footprint
A real-time monitoring system based on IoT can be highly effective in fulfilling water needs, saving water cost, energy cost and reducing water footprint. (Image: Piqsels)
December 26, 2021 Strengthen governance and institutional capacity to mainstream climate adaptation into ICT policies
There is a need to include climate adaptation projects in regional cooperation platforms such as Asia-Pacific Information Superhighway that advance digital development (Image: ESCAP)
August 19, 2021 Use of digital tools for implementing natural resources management at scale in rural India
Digital planning tools like CLART can go a long way in achieving better land-use outcomes (Image: Foundation for Ecological Security)
Hydrological considerations for landfill and waste disposal sites – A research report by National Institute of Hydrology
The report details out the status of landfill and waste disposal technologies in India & abroad and reviews the scientific studies undertaken to support its design for long-lasting performance. Posted on 21 Jun, 2010 04:57 PM

The report details out the status of landfill and waste disposal technologies in India & abroad and reviews the scientific studies undertaken to support its design for long-lasting performance. Hydrological considerations play a major role in the selection of landfill sites and in the design and performance of landfills for hazardous waste management. A landfill is a form of a biochemical reactor where the municipal solid waste (MSW) comes into contact with moisture, a catalyst, and gets decomposed into solid waste, gases and liquid contaminants (leachate) resulting in the release of heat. The design of the control and recovery systems requires the estimation of amount and composition of gas and leachate accurately, as also the changes in these with time. Lysimeters are used to simulate the landfill performance.

Status report of saltwater intrusion and groundwater management studies in coastal and deltaic regions – A research report by the National Institute of Hydrology
The report presents a review on the status of research related to saltwater intrusion and groundwater management in coastal and deltaic environments in the east coast of South India. Posted on 21 Jun, 2010 04:50 PM

The report presents a literature review on the status of research related to saltwater intrusion and groundwater management in coastal and deltaic environments in the east coast of South India. The area is typically characterized by highly productive and alluvial aquifers and high use of both surface as well as groundwater. Seawater intrusion into the freshwater aquifers is extensive due to increased pumpages.

A quantitative understanding of the patterns of movement and mixing between freshwater and saline water and the factors that influence these processes is stressed in the report. It presents the mechanics of saltwater intrusion through studies by Ghyben and Herzberg and later on by Hubbert. A comprehensive review of studies by Reilly and Goodman relating to saltwater intrusion is discussed. Later advances in understanding saltwater-freshwater relationship through numerical models like sharp interface model and miscible flow model are described.

Remote sensing and GIS applications in zonation of waterlogging in command areas – A research report by the National Institute of Hydrology
The study assesses waterlogging in a canal command area in Rohtak and Jhajjhar districts through waterlogging area zonation using multi-spectral imagery data of pre and post monsoon period. Posted on 21 Jun, 2010 04:48 PM

The study assesses waterlogging in a canal command area in Rohtak and Jhajjhar districts through waterlogging area zonation using multi-spectral and multi-temporal imagery like IRS LISS III data of pre and post monsoon period. Seasonal and permanent waterlogged area and standing water were delineated on the basis of remote sensing data, digital elevation model and groundwater data.

Groundwater quality in adjoining areas of River Yamuna at Delhi - A research report by National Institute of Hydrology
The study assesses the suitability of groundwater for drinking and irrigation use and examines the likely impact of Yamuna river water quality on groundwater in New Delhi. Posted on 21 Jun, 2010 04:41 PM

The study assesses the suitability of groundwater for drinking and irrigation use and examines the likely impact of Yamuna river water quality on groundwater. Delhi is faced with severe problems associated with groundwater quality and quantity. The quality varies spatially and seasonally, with depth and is primarily governed by the extent and composition of dissolved solids present in it. Surface water bodies play a role and the hydraulic gradient determines the lateral and vertical migration in the groundwater flow system.

Groundwater samples were collected through extensive field surveys covering entire Delhi area representing various geo-hydrological and land-use conditions. The data has been analysed with respect to BIS and WHO standards to examine its suitability for various uses. The area has a peculiar feature of infiltration of surface water to groundwater from river Yamuna and from various drains.

Sustainable sanitation and water management ‘Training of Trainers’ course, ECOSAN, Pune
Posted on 21 Jun, 2010 10:23 AM

Ecosan Services Foundation

Ecosan Services Foundation in collaboration with the Sustainable Sanitation and Water Resources Management Network Asia (SSWRMNA) is offering a SSWM Trainers course.

Venue:
Pune

Description:     

The training of trainer’s course modules will focus on teaching methods and the design of target group oriented SSWM modules to optimize knowledge transfer. It will enable trainers to design and conduct their own SSWM courses incorporating the philosophy and principles of adult learning in sustainable sanitation and water management scenario.

Sustainable sanitation and water management ‘Expert training course’, ECOSAN, Pune
Posted on 21 Jun, 2010 10:04 AM

Ecosan Services Foundation

Ecosan Services Foundation in collaboration with the Sustainable Sanitation and Water Resources Management Network Asia (SSWRMNA) is offering a SSWM Expert course.

Venue: Pune

Description: 

Water resources are under increasing pressure. Population growth, urbanization and a steep increase in water consumption for domestic uses, agriculture and industry has created a water crisis. Climate change is exacerbating the problems of water availability. This scenario leads to water scarcity and water-conflicts worldwide and seriously undermines progress towards achieving the Millennium Development Goals.

Geomorphology and soil erosion in Juni Nadi watershed - A research report by National Institute of Hydrology
The study estimates geomorphological parameters and soil loss using the USLE and GIS techniques for the Juni Nadi watershed in Jammu Siwaliks for developing soil conservation strategies. Posted on 21 Jun, 2010 02:17 AM

The study estimates geomorphological parameters and soil loss using the Universal Soil Loss Equation (USLE) and Geographical Information Systems (GIS) techniques for the Juni nadi watershed in Jammu Siwaliks with the idea of helping planners develop soil conservation strategies. Geomorphological characteristics of a river basin shape runoff processes and the occurrence of floods especially in the mountainous areas. In ungauged catchments with limited data, such as Juni nadi watershed, these parameters can be useful in understanding the hydrological characteristics. Reliable estimates of soil loss too can be useful in formulating watershed strategies to reduce soil loss to acceptable levels.  

Statistical analysis of water quality data of river Yamuna: A research report by National Institute of Hydrology
The study models the variations in water quality parameters of Yamuna river by means of stochastic approach using Central Water Commission’s monthly data for the period 1990-95. Posted on 21 Jun, 2010 01:58 AM

The study models the variations in water quality parameters of Yamuna river by means of stochastic approach using Central Water Commission’s monthly data for the period 1990-95 and makes projections for the year 1996. The results obtained for different water quality variables have been compared with the observed values and were found to be satisfactory. 

Hydrological aspects of rainwater harvesting in the Kandi belt of Jammu region - A research report by National Institute of Hydrology
The study discusses the hydrological aspects of rainwater harvesting in the Kandi belt with the help of a case study on water availability in a pond in village Badhori, Jammu. Posted on 21 Jun, 2010 12:54 AM

The study discusses the hydrological aspects of rainwater harvesting in the Kandi belt in the foothill zone of Siwalik in Jammu region with the help of a case study on water availability in a pond in village Badhori (Samba district, Jammu). It describes the climate, soils, geology, geomorphology and drainage of the Kandi belt. It is marked with small watersheds having low denuded hills and undulating cultivated lands that need to be developed on a watershed basis through engineering and non-engineering measures of rainwater harvesting and soil conservation.

Estimation of irrigation return flow in Lokapavani area of KR Sagar command in Karnataka - A research report by National Institute of Hydrology
The study deals with the estimation of hydrological soil properties of the area of Lokapavani River in KR Sagar Command in Mandya district of Karnataka. Posted on 21 Jun, 2010 12:22 AM

The study deals with the estimation of hydrological soil properties of the area of Lokapavani River in KR Sagar Command in Mandya district of Karnataka. The properties determined are soil texture, porosity, saturated hydraulic conductivity, specific gravity and soil moisture characteristics.

The disturbed and undisturbed soil samples from eighteen locations along different depths were collected and analyzed. Eighty-five disturbed soil samples were used to determine the grain size distribution, porosity, specific gravity and soil moisture characteristic curves with the help of electromagnetic sieve shaker, master sizer, GeoPyc and pressure plate apparatus. Twenty undisturbed soil samples were used to determine saturated hydraulic conductivity with ICW Permeameter.

×