The paper published in the Journal of Limnology begins by highlighting the problem of the gradual deterioration in the quality of lakes and informs that lakes are suffering from different stress factors and need to be restored using different approaches. The paper goes on to discuss the different approaches and technologies that can be used to restore lakes.
As the paper informs, eutrophication remains as the main water quality management problem for inland waters: both lakes and reservoirs. The way to curb the degradation is to stop the nutrient sources and to accelerate the restoration with help of in-lake technologies. Especially lakes with a long retention time need (eco-) technological help to decrease the nutrient content in the free water. The microbial and other organic matter from sewage and other autochthonous biomasses, causes oxygen depletion, which has many adverse effects.
In less developed countries, big reservoirs function as sewage treatment plants. Natural aeration solves problems only partly and many pollutants tend to accumulate in the sediments. The acidification by acid rain and by pyrite oxidation has to be controlled by acid neutralizing technologies. Addition of alkaline chemicals is useful only for soft waters, and technologies for (microbial) alkalinization of very acidic hardwater mining lakes are in development.
The corrective measures differ from those in use for eutrophication control. The salinization and water shortage mostly occurs if more water is used than available. L. Aral, L. Tschad, the Dead Sea or L. Nasser belong to waters with most severe environmental problems on a global scale. Their hydrologic regime needs to be evaluated. The inflow of salt water at the bottom of some mining lakes adds to stability of stratification, and thus accumulation of hydrogen sulphide in the monimolimnion of the meromictic lakes.
Destratification, which is the most used technology, is only restricted applicable because of the dangerous concentrations of the byproducts of biological degradation. The contamination of lakes with hazardous substances from industry and agriculture require different restoration technologies, including subhydric isolation and storage, addition of nutrients for better self-purification or anaerobic technologies, to eliminate the pollutant nitrate by microbial denitrification. The retention time is an important parameter for modellers and limnologists, that allows them to decide, which technologies – hydromechanical, chemical or biological – have to be applied alone or in combination to cope best with each specific problem. The paper ends by reminding that the technologies have to be economical and ecologically safe.
Download the paper from below: